|
2.3mm Prop Adaptor/Spinner 2.26mm
A turned aluminium propeller adaptor/spinner that is made for 2.3mm shafts. However it will work with the smaller 2.26mm shafts by sleeving with a short length of our thin heat-shrink kynar material. These smaller motors often have a high KV rating and are especially popular in the United States of America. The spinner is suppplied with 50mm of the material which should be cut to motor shaft length plus 1mm then shrunk with a hot air blowing gun. A smear of silicone grease will ease the spinner in place. Store the kynar carefully in a cool place; being translucent and slippery it is also easily lost!
The adaptor is described in detail under the 2.3mm heading below.
|
LOGIN TO MYMUGI
PROPELLERS