Mugi Shop - Evo Fins

Mugi Evo pair of Fins

A pair of blade cut fins posted to you using the Royal Mail with some scrap 2.5mm black twinwall reinforcement pieces. To make them like the original laser cut versions, then round off the corners with a sharp blade or scissors. Qualifying for Large Letter Post rate in the UK

Just the thing to smarten up your model after inverted carpark/gravel landings, low passes under vehicles or close encounters with barbed wire fencing. Colour these white fins (outer side only) when you mount  them-it greatly assists orientation of the model when in the air.Your model may require the LE taping as usual with the Scotch 550 you should still have. Hopefully the barbeque skewers survived the mishap but 2.5mm birchwood replacements can be ordered here from Mugi. Commonly found skewers tend to be thicker 3mm ones and will need whittling down with a sharp knife or modelling plane. Easier to use ours.

Code Description Price Add to basket MEF Mugi Evo Fins pair £1.00